Skip to content
If visiting us in person, please be considerate of our staff and observe all appropriate COVID-19 precautions.
If visiting us in person, please be considerate of our staff and observe all appropriate COVID-19 precautions.
Visit Us: 7000 Bryan Dairy Road Suite B1 Largo, FL 33777

SE Fast Ripper 29" BMX Freestyle Bike-Black Sparkle

by SE
Sold out
$1,099.95

About This Product

The SE Fast Ripper 29" BMX Freestyle Bike-Black Sparkle sums up SE's legendary motto of "BMX Innovations." SE took the Big Ripper and cranked it to the tenth power with the addition of a SRAM GX 1x10 drivetrain and a Shimano Deore 10-speed cassette. Wait a second SE didn't stop there because this year they added, the Tektro Auriga hydraulic disc brakes, water bottle mounts and alloy 2-piece cranks really put this bike over the top. SE put the additional add-ons to complete the Fast Ripper all the way from top to bottom and front to back. The Freedom ThickSlick tires will be leaving your friends in the dust. See ya later alligator.

KEY FEATURES

  • 6061 aluminum floval tubing frame with integrated head tube, looptail rear end, fixed dropouts, internal cable routing and removable derailleur hanger
  • Full Cr-Mo Landing Gear forks
  • SE Racing forged alloy 2-piece cranks with 24mm hollow alloy spindle, external sealed bearing bottom bracket and alloy chainring
  • SRAM GX 1x10 short-cage derailleur
  • SRAM GX 1x10 Trigger shifter with exact actuation
  • Sealed-bearing alloy hubs with deep-dish, double-wall rims and Shimano 11-32T 10-speed cassette
  • Freedom ThickSlick Comp 29” x 2.10” tires
  • Tektro Auriga hydraulic disc brakes with easy to adjust open system, dual piston, 160mm rotors
  • SE Lightning Flyer seat with bottle opener
  • 31 pounds

SPECIFICATIONS

  • GRIPS: SE Racing Flangeless Mushroom Wing Grips w/ SE Rubber End Plugs
  • FRAME: 6061 Aluminum Floval Tubing,Internally-machined Integrated Head Tube, Looptail Rear End, Retro Dropouts, Water Bottle Mounts, 68mm Euro Bottom Bracket, 135mm Spaced Fixed Dropouts, Internal Cable Routing on Top Tube, Disc Brake Tabs, Removable Derailleur Hanger
  • FORK: Landing Gear, Full Cr-Mo, Disc Tabs, 436mm Axle to Crown, 29mm Offset, 100mm Spaced Dropouts
  • CRANKSET: SE Racing 175mm Forged Alloy 2-pc Cranks, External Sealed Euro Bottom Bracket, 24mm Hollow Alloy Spindle, 32T CNC Narrow/Wide Alloy Chainring
  • PEDALS: X-Pedo Low-profile Platform w/ Removable Pins
  • REAR DERAILLEUR: SRAM GX 1x10, Short Cage
  • SHIFTERS: SRAM GX 1x10, Trigger Shifter, Exact Actuation, Alloy Lever
  • CASSETTE: Shimano Deore CS-HG500, 10-speed, 11-32T
  • CHAIN: KMC X10-EL
  • WHEELSET: Sealed Bearing Alloy 36H Nutted Hubs, 100mm Front Hub & 135mm Rear Hub, w/ Deep Dish Double-Wall Rims, 11-32T 10-speed Cassette, Stainless Spokes
  • TIRES: Freedom ThickSlick Comp, 29" x 2.10" Front & Rear
  • BRAKESET: Tektro Auriga, Hydraulic Disc, Easy to Adjust Open System, Dual Piston, Automatic Caliper Positioning, 160mm Rotors
  • BRAKE LEVERS: Tektro Auriga, 2-Finger Alloy, Front & Rear
  • HEADSET: FSA Orbit CE, Sealed 1-1/8" Integrated
  • HANDLEBAR: Big Honkin' Cr-Mo Cruiser Bar, 31" x 6", 10° Backsweep, 1° Upsweep
  • STEM: Retro Alloy Top-Load w/ Engraved Lightning Bolt & Lightweight Cutouts, 55mm Reach
  • SEAT: Lightning Flyer Seat w/ Custom SE Bottle Opener Brace
  • SEATPOST: Micro-Adjust Alloy, 27.2mm
  • SEAT CLAMP: Quick Release Clamp, Alloy, 31.8mm Inner Diameter
  • ACCESSORIES: Alloy Valve Caps, Water Bottle Mounts
  • WEIGHT: 31 lbs / 14.06 kgs

GEOMETRY

  • TOP TUBE, ACTUAL: 23.6"
  • SEAT TUBE, CENTER TO TOP: 16.9"
  • SEAT TUBE ANGLE: 71°
  • HEAD TUBE ANGLE: 71°
  • CHAINSTAY LENGTH: 18"
  • WHEELBASE: 43.3"
  • BOTTOM BRACKET HEIGHT: 12.1"
  • STANDOVER: 30.6"
  • SUGGESTED RIDER SIZE: 5'5"+ (165cm+)
  • STEM: 55mm
  • HANDLEBAR WIDTH: 29"
  • CRANK: 175mm
  • WHEEL SIZE: 29"
  • SEAT POST DIAMETER: 27.2mm

NOTE: Complete Bike specifications and components may differ from photos and description. Manufacturers reserve the right to make changes and/or substitutions due to parts availability, production requirements and ongoing development decisions.